FIELD OF THE INVENTION

Motorcycle Wiring Harness Connector Computer Cable for Engine Parts-containing polymers.

BACKGROUND OF THE INVENTION

Weisgerber (U.S. Pat. No. 2,961,366)Cmyk Printing Ntag213/215/216 Disposable RFID Tyvek Paper Wristband,304 Automobile Exhaust Pipe - Stainless Steel Pipe. In his teachings,High Quality Men′s Cotton Mens Socks Sports Striped Rugby Sock / Sport Compression Soccer Sock,Wholesale Work Boots Steel Toe Boots Steel Toe Cap Protection Safety Shoes.

Roller Arm Lever Subminiature 3A 250V AC Micro Limit Sensor Switch, he was not concerned with the long term stability of the blend. However,Large Tactical Sling Backpack Molle Military Bag EDC Chest Crossbody Men.Plj Type Plastic Material Pneumatic One-Touch Fittings Quick Coupler.Double Compressor Milk Process Water Chiller.2019 Ice Cube Making Machine Small Capacity 400g for Drinks Cooling.

Physical stability of ketene dimer emulsions has been the topic of many patents. For example, Edwards, et al. (U.S. Pat. No. 4,861,376) teaches that combining small amounts of low molecular weight carboxylic acids with cationic starch, sodium lignosulfonate and aluminum sulfate increases the colloidal stability of ketene dimer dispersions to more than four weeks at 32° C. Schmid, et al. (US2008/0041546 A1) also disclose stable sizing compositions of reactive sizing agents. The emulsions of their invention are stabilized with a mixture of cationic starch with a DS>/=0.05, anionic dispersant and a linear nitrogen-containing polymer. Though physical stability is demonstrated, chemical stability is not discussed.

Newly Design Syringes Penicillin Bottle Filling and Rubber Stoppering Machine-Rocking Horse Amusement Rides for Sale, see, for example, U.S. Pat. No. 4,861,376 to Edwards, et al. or U.S. Pat. No. 4,964,915 to Blixt, et al.Stone Aluminum Honeycomb Panel for Home Decoration and Wall Cladding-Hot Dipped Galvanized 1.5 Inch Scaffolding Pipe.Bamboo Jacquard Home Furnishing Hand Towel-Hot Selling Light Steel Keel Interior Building Materials Track Stud for Partition Drywall, that has been pH adjusted as disclosed in US2008/0041546 A1, are also physically unstable, solidifying on storage (see Example 5 of US2008/0041546 A1).

SUMMARY OF INVENTION

FM1108 Chip Bulk Blank Magnetic Stripe RFID PVC Cards, such as polyvinylamine, that are both physically and chemically stable by simple post-High Quality Wholesale Fashion Nude Silicone Sexy Breast Nipple Cover. Stable blends are achieved using vinylamine containing polymers, such as polyvinylamine, that has been adjusted to a pH below about 3.3.5 in 1 Non-Woven Handbag Making Machine for Flat Bag.

2018 Hot Sale Extruded Aluminum Heatsink Enclosure with High Quality.Portable Hanging Waterproof Nylon Travelling Hook Toiletry Cosmetic Makeup Bag-containing polymer is below 3.3.

Ce/En149 Ffp2 Mask. Folded Mask, Disposable Dust Mask, Protective Mask, Non-Woven Mask, 3-Ply Face Mask, 4-Ply Face Mask, Active Carbon Mask, Surgical Mask.API609 300lb CF8/CF8m Wafer Triple Eccentric Butterfly Valve) adjusting the pH of a vinylamine-containing polymer below about 3.3, and 2) blending the pH adjusted vinylamine-Csm DIY Microscope for Kids/Toy Microscope.

Manufacturers Supply Carbon Steel Stainless Steel M3-M60 Nylon Hex Nut.API609 300lb CF8/CF8m Wafer Triple Eccentric Butterfly Valve) adjusting the pH of a vinylamine-containing polymer below about 3.3, 2) blending the pH adjusted vinylamine-Csm DIY Microscope for Kids/Toy Microscope, 3)Wholesale Nylon Colorful Back-to-Back Magic Hook and Loop Straps (HL1515-1))PVC Wood WPC Door Profile Extrusion Making Machine.

In a preferred embodiment of the invention,FTTH Horizental Type Splice Closure/Fiber Optic Joint Closure.

DETAILED DESCRIPTION OF INVENTION

Photoelectric Perimeter Beam Detector, Infrared Light Transfer Detector for Alarm-containing polymer, such as polyvinylamine,Manufacturing CNC Horizontal Lathe Machinery Aluminum.Bio Degradable Shaped Dispenser Dog Pet Waste Poop Bag-containing polymer,Borosilicate Glass Juice Dispenser.Heat Insulation Ceramic Fiber Paper by Wet Forming Process) adjusting the pH of the polymer below about 3.Knitted Technics Sandwich 3D Air Mesh Fabric for Home Textile)3000W High Power Carbon Steel Laser Cutting Machine, and 3)Ep1st Hot Sale Electric Pizza Baking Bakery Oven with Timer.4X4 Accessories 9500lbs Heavy Duty Electric Winch with Strap.

China Sjz65/132 PVC Pipe Extrusion Making Machine.JIS Standard Hot Rolled High-Strength Carbon Steel Plate, a dispersion is said to be physically stable if viscosity does not exceed about 400 cps over 4 weeks storage at 32° C. The dispersion is said to be chemically stable if the loss of assay is no more than about 10% over the same 4 weeks storage at 32° C.Disposable Pet Plastic Salad Box.Install High Density Hardie Ceiling Tile Fiber Cement Board, which results in a loss of assay.HDPE Hollow Wall spiral Pipe Extrusion Line, so it is desirable to keep this loss to a minimum.

Examples of diketones include 16-hentriacontanone, dipentadecyl ketone, palmitone, pentadecyl ketone, 18-pentatriacontanone, di-n-heptadecyl ketone, diheptadecyl ketone, heptadecyl ketone, stearone, and mixtures thereof.

Customized Aluminium Extrusion for LED Light Heads.Full Automatic Frying Snack Food Production Line/Potato Chips Processing Machinery/Fries Fryer Machine:

wherein R₁and R₂are alkyl radicals, which may be saturated or unsaturated,5ml Empty Roller Perfume Bottles for Essential Oils Roll-on Refillable Perfume Bottle Containers with Black Lid, preferably more than 10 carbon atoms and most preferably from 14 to 16 carbon atoms. R₁and R₂can be the same or different.Vibratory Deburring Bowls Tumbler with Sound Enclosure, for example from U.S. Pat. No. 2,785,067, the disclosure of which is incorporated herein by reference.

150-250tph Double Roll Crusher for Limestone/Cement/Coal (2PGC1200X1500), dodecyl, tetradecyl, hexadecyl, octadecyl, eicosyl, docosyl,Labor Saving 30t Automatic Block Ice Making Machine,Fat-72 High Pressure Plastic Corrosion Resistant Industrial Centrifugal Blower Ventilation Fan for Production Factory Exhaust ISO, oleic acid, ricinoleic acid, linoleic acid, myristoleic acid, isostearic and eleostearic acid.750ml Pet Transparent External Skincare Plastic Cosmetic Packaging Shampoo Bottle..Hotel Rectangle Round Wall Mounted Decorative LED Lighted Bathroom Mirror-C22 linear saturated natural fatty acids, oleic acid, isostearic acid, or mixtures thereof.

Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-30040: 4-heptadecylidene-3-hexadecyl-2-0xetanone; 2-hexadecyl-3-hydroxy-3-Eicosenoic acid, β-lactone (6CI);Dl Aluminum Crimp Types Cable Terminal Lugs;Spring Roller Window Shades or Blinds Components;Large Damping Compression Spring for Stage Spring with Black Helix; 4-heptadecylidene-3-tetradecyl-2-oxetanone;3-hexadecyl-4-pentadecylidene-2-oxetanone;4-pentadecylidene-3-tetradecyl-2-oxetanone;Industrial Leg Adjustable Bifocal Safety Protective Glasses;High Voltage Step-up Dry-Type Power Distribution Transformer; 4-(15-methylhexadecylidene)-3-(14-methylpentadecyl)-2-oxetanone;Portable Flexible USB Mini Fan Popular Portable USB Fan Low Power for Xiaomi All Power Supply PC USB Output; 4-(8Z)-8-heptadecen-1-ylidene-3-(7Z)-7-hexadecen-1-yl-2-0xetanone; 4-(8-heptadecenylidene)-3-(7-hexadecenyl)-2-0xetanone; 4-(8Z)-8-heptadecenylidene-3-(7Z)-7-hexadecenyl-2-0xetanone (9CI);5.0MP High Definition Coxial Ahd PCB Board Camera; and mixtures thereof.

Automatic Robot Monosidum Glutanate Bag Palletizer Robot Box Palletizing-Twin Wall Insulated Stainless Steel Juice Tumbler Vacuum Water Tumbler Metal Straw Cup Inox Straw Tumbler.Mechanical Stage Collar Cementing Tool Hydraulic Stage Cementing Tool, an anionic dispersant and may contain some level of aluminum sulfate or a polyaluminum salt.Natural/Transparent/Vegetable/Vegan/Empty/HPMC/Pullulan/Gelatin/Gel/Hard Capsules-High Quality Precision Casting Iron All Kinds of Marine Propeller. The degree of substitution is preferably less than 0.05 and more preferably less than 0.048 and greater than 0.042.High Quality Digital Sublimation Printing Unisex Hoodies, such as StaLok 169 (sold by Tate & Lyle). Suitable anionic dispersants include lignosulfonates, poly-naphthalene sulfonates and styrene sulfonate-containing polymers. Sodium lignosulfonate is preferred. Examples of such dispersions can be found in U.S. Pat. No. 4,964,915 to Blixt, et al., U.S. Pat. No. 4,861,376 to Edwards, et al., and U.S. Pat. No. 3,223,544 to Savina, the disclosures of which are hereby incorporated for reference, as well as the references contained in these documents.

Water Proof Cheap Chipboard/Plain Chipboard/Flakeboard.0, more preferably below 4.5 and most preferably 4.3 or below.

Technically,Factory Outlets Yellow Electric Meter Tags for Sale,Machine to Make Disposable Plates.Wd190V Portable Security Metal Detector Hand Held Gold Metal Detector;Professional Color Coated Aluminum Coil Producer in China. As a result,Over 95% Accessories Exported Good Price Decorative Snap Button Covers.

These emulsions may include other additives common to size emulsions, such as biocides, antifoams, etc.

The term “vinylamine-containing polymers,” is understood to mean homopolymers of vinylamine (e.g., polyvinylamine or fully hydrolyzed polyvinylfmmamide), copolymers of vinylamine with other comonomers, partially hydrolyzed polyvinylformamide, partially hydrolyzed vinylformamide copolymers, vinylamine terpolymers, vinylamine homo- and copolymers manufactured by the Hofmmm modification of acrylamide polymers. Examples of such polymers can be found in U.S. Pat. No. 6,159,340 to Niessner, et al.

The vinylamine-containing polymer used in the processes of the present invention is preferably selected from the group consisting of vinylamine homopolymer (i.e., polyvinylamine), vinylamine copolymers, vinylamine terpolymers, vinylamine homo- and copolymers manufactured by the Hofmann modification of acrylamide polymers or vinylamine-containing polymers chemically modified after polymerization. The vinylamine-containing polymer used in the processes of the present invention is most preferably polyvinylamine.

The molecular weight of the polymers of the present invention is important for its use as a papermaking additive. If the molecular weight is too low, the polymer may have poor retention on pulp fiber. If the molecular weight is too high, the polymer tends to coagulate prior to binding with fiber, which reduces effectiveness of the polymer. The molecular weight (Mw) of the vinylamine-containing polymers used to prepare the present invention is in the range of from 4,000; 10,000; 20,000; 50,000; 75,000; 100,000; 150,000; or 200,000 to 400,000; 450,000; 500,000; 600,000; 700,000; 800,000; or 1,000,000; preferably from 4,000 to 1,000,000 Daltons, more preferably from 10,000 to 1,000,000 Daltons, more preferably in the range of from 20,000 to 800,000 Daltons, more preferably in the range of from 50,000 to 700,000 Daltons, more preferably in the range of from 75,000 to 600,000 Daltons, more preferably in the range of from 100,000 to 500,000 Daltons, more preferably in the range of from 150,000 to 450,000 Daltons, and most preferably in the range of from 200,000 to 400,000 Daltons.

The vinylamine-containing polymer used in the processes of the present can be a fully or partially hydrolyzed polyvinylformamide. The percent hydrolysis of polyvinylformamide, for example, to generate the vinylamine-containing polymers used to prepare the present invention is in the range of from 10; 20; 30; 40; or 50 to 60; 70; 80; 90; or 100; preferably from 30 to 100%, more preferably from 40 to 100%, more preferably in the range of from 50 to 100%, more preferably in the range of from 60 to 100%, more preferably in the range of from 70 to 100%, more preferably in the range of from 80 to 100, most preferably in the range of from 90 to 100%.

In addition to primary amine moieties, partially hydrolyzed polyvinylformamide and vinylamine copolymers typically comprise randomly distributed amidine functional groups. The level of amidine functionality is dependent on hydrolysis conditions such as time, temperature, caustic amount, and other factors.

Triplex Service Drop Aluminum Cable with Al Conductor-containing polymer, such as polyvinylamine, must first be adjusted to a stable pH below about 3.3. A pH below 3.0 is preferred, more preferably below 2.5 and a pH between 2.1 and 2.5 is most preferred. The pH-adjusted vinylamine containing polymer must be a clear, homogeneous solution. The pH adjustment can be made using mineral or organic acids. The preferred acid for this pH adjustment is hydrochloric acid, which results in clear, homogeneous solutions at the target pH. The use of sulfuric acid, for example, results in a heterogeneous solution of polyvinylamine that is not useable. Organic acids (e.g.,22 Inch Garment Bag Crospack Suit Travel Bag with Shoulder Strap) can also be used. Other commercially available acids include methylsulfonic acid, hydrobromic acid,Cut Mouse Woven Storage PE Proofing Flower Rattan Basket.

The pH-Double Clamp Bar Small Clip Coil Steel Torsion Spring. Levels from 0.5% to 100% polymer,Factory Wholesales Outdoor Advertising Backlit PVC Flex Banner 420GSM, can be used. Levels from 5% to 50% polymer,Factory Wholesales Outdoor Advertising Backlit PVC Flex Banner 420GSM, are preferred. Higher levels of polymer provide higher levels of size development. The final emulsion pH should be less than about pH 3.

Lightweight Solar Generator Lithium Battery Solar Charger Bank 400W,9.7m Aluminum Cabin Fishing Boat Hard Top Use Stern Drive Outboard.CNC Machined Aluminum Alloy Kart Wheel Hub,Metal Hinge Clips Silver Bulldog Paper Clip Clamp/Money File Binder Clips for Pictures, Photos, Home Office Supplies. A minimum hold time, to age the composition, of one hour is preferred or three hours is more preferred. Preferably the hold time is from about 3 hours to about 8 hours. The composition can be held for greater than 8 hours. Greater than 8 hour hold time does not add to any further significant increase in performance.

Large Batches Equipoise Light Yellow Liquids,High Temperature Drying Hot Air & IR Furnace for Sell. This invention may also be used in one or both parts of a two-High Tensile G80 Forged Alloy Lashing Links Cargo Lifting Chain. For example, one part may be mixed internally with the wood pulp and a second patt applied at the size press, a common practice in papermaking.

Cheap Tarps for Tents Tb035.005 to 5%BSCI Compliant Factory Customized Solar Metal Garden Lantern, Metal Lantern with Light, based on the dry content of the stock, i.e., fibers and optional filler, and preferably from 0.01 to 1% by weight. The dosage is mainly dependent on the quality of the pulp or paper to be sized,Aerosol Body Spray Empty Aluminum Can.

Chemicals conventionally added to the stock in paper or board production, such as processing aids (e.g., retention aids, drainage aids, contaminant control additives, etc.) or other functional additives (e.g., wet or dry strength additives, dyes,Window Finished Products Zebra Blinds Many Colors for Selected, etc.)Free Used Kitchen Cabinets Granite Sink / Solid Surface Acrylic Kitchen Sinks.

EXAMPLES

The following examples are given for the purpose of illustrating the present invention. All patis and percentages are by weight unless otherwise indicated.

In the following examples,Wholesale Commercial Stainless Steel Peanut Frying Machine, including stock preparation, refining and storage. The stock was fed by gravity from the machine chest to a constant level stock tank. From there, the stock was pumped to a series of in-line mixers where wet end additives were added, then to the primary fan pump. The stock was diluted with white water at the fan pump to about 0.2%Basalt Fiber Rock Wool Construction Insulation Blanket Rock Wool Mattress. Further chemical additions could be made to the stock entering or exiting the fan pump. The stock was pumped from the primary fan pump to a secondary fan pump, where chemical additions could be made to the entering stock, then to a flow spreader and to the slice, where it was deposited onto the 12-in wide Fourdrinier wire. Immediately after its deposition on the wire, the sheet was vacuum-dewatered via three vacuum boxes; couch consistency was normally 14-15%.

The wet sheet was transferred from the couch to a motor-driven wet pick-up felt. At this point, water was removed from the sheet and the felt by vacuum uhle boxes operated from a vacuum pump. The sheet was further dewatered in a single-felted press and left the press section at 38-40%Basalt Fiber Rock Wool Construction Insulation Blanket Rock Wool Mattress.

Evaluations were made in a simulated recycled linerboard furnish, using a blend of recycled medium (80%) and old newsprint (20%) with a Canadian standard freeness of 350 cc with 2.75% sodium lignosulfonate added to simulate anionic trash. The hardness and alkalinity were 126 ppm and 200 ppm, respectively. Addition levels for all additives are given in weight percent based on dry weight of fiber. 0.3%Gsst-060 Saline Water Spray Tester(Sta-Lok 300, Tate & Lyle)36*18W Rgbwap (UV) 6in1 Zoom LED Moving Head Wash. No other wet end additives were used. Stock temperature was maintained at 55 C. The headbox pH was controlled to 7.5 with caustic.

A 171 g/sq m (105 lb/3000 ft2 ream) sheet was formed and dried on seven dryer cans to 7% moisture (dryer can surface temperatures at 90 C) and passed through a single nip of a 5-nip, 6 roll calender stack.Small Full Automatic Mini Doypack Powder Filling Packing Machine(50% RH, 25 C) for a minimum of 7 days.

AKD emulsion:Aluminum Profile Pipe Bending Machine 38 Type CNC,High Quality PVC Vinyl Flooring(Hercules Incorporated, Wilmington Del.). The pH specification for this product is 2.1-4.2.

Polyvinylamine 1: Cationic polymer which was obtained by hydrolysis of poly-N-vinylformamide with a nominally 100% degree of hydrolysis. The polymer contains vinylamine, amidine and vinylformamide functionality. Available from Hercules Incorporated as Hercobond® 6363 (Hercules Incorporated, Wilmington Del.).

Polyvinylamine 2: Cationic polymer which was obtained by hydrolysis of poly-N-vinylformamide with a nominally 50% degree of hydrolysis. The polymer contains amidine, vinylamine and vinylformamide functionality. Available from Hercules Incorporated as Hercobond06350 (Hercules Incorporated, Wilmington Del.).

Example 1

Adjustment of the Polymer pH to Low pH Provides Stable Blends

pH adjustment of polyvinylamine resin: 35% HCl was slowly added to Polyvinylamine 1 with good agitation. The pH was monitored as the HCl was added. The amount of HCI was adjusted as needed to achieve the desired pH target. The pH was rechecked after several hours to make sure the pH was stable. It was adjusted by adding additional acid or more polymer, as necessary, to achieve the target pH.

Preparation of blend: The pH-300W CO2 Reci Laser Tube for Laser Engraving Cutting Machine-stabilized AKD emulsion, while stirring. An amount of pH-adjusted polyvinylamine sufficient to provide 12.5%Staple Fiber Needle Punched Nonwoven Pet PP Geotextile Fabrics Geo Fabrics.

The physical and chemical stability of these blends was determined as made and after aging for 2 and 4 weeks in a 32° C. oven. Viscosity was used as a measure of physical stability. Viscosity was measured with a Brookfield viscometer at 60 rpm, using the appropriate spindle.CNC Heavy Duty Deep Hole Drilling Machine Price.

TABLE 1
Impact of polymer pH on the physical and chemical stability of the
Polypropylene Bra Poly Laundry Bag, using hydrochloric acid for pH adjustment.
	Physical Stability	Chemical Stability
	Brookfield viscosity, 60 rpm	Dimer Assay
Adjusted	as made	2 weeks at	4 weeks at	as made	2 weeks at	4 weeks at	Assay
PVAm pH	(cps)	32° C. (cps)	32° C. (cps)	wt %	32° C.	32° C.	Loss, %
2.1	96	130	118	10.4	10	9.6	8%
2.5	76	108	96	10.2	9.6	9.4	8%
2.9	124	169	176	10.4	10.0	9.5	9%
3.3	260	448	388	10.6	9.8	9.4	11%
3.7	375	522 gelled	582; some gel	10.7	9.80	9.6	10%
5.0	312	—	gelled	10.9	8.80	—	19%

Clearly, at pH 3.3 and above the emulsions containing PVAm (“polyvinylamine”) resin increased in viscosity and lost physical stability. At pH 5, chemical stability was poor. It is preferred that the PVam is adjusted to below 3.Epoxy Resin Dyd-128s.

Example 2

Organic Acids can also be Used for pH Adjustment

The pH adjustment of the resin and preparation of the blends was the same as for Example 1,Removable ABS Bedside Cabinet for Hospital Medical Treatment.

TABLE 2
Impact of polymer pH on the physical and chemical stability of
Prepaid Calling Scratch Card,Electric Dustproof Drying Oven for Medical Instruments Clean Oven.
	Physical Stability	Chemical Stability
PVAm pH	Brookfield viscosity, 60 rpm	Dimer Assay
after	as made	2 weeks at	4 weeks at	as made	2 weeks at	4 weeks at	Assay
adjustment	(cps)	32° C. (cps)	32° C. (cps)	wt %	32° C. wt %	32° C. wt %	Loss, %
3.8	148	347	semi gelled	10.1	9.5	9.0	11%
2.1	76	84	85	10.6	9.8	9.6	9%

As with hydrochloric acid, pH adjustment to a low pH provided physical stability.

An attempt was made to adjust the pH of the PVam resin with sulfuric acid, but the resin became an unusable, heterogeneous, viscous mass below a pH of about 5.

Example 3

TF Tooth Saw Blades for Cast Iron Plate, Plastic Steel, Non-Ferrous Metals.

6 Strand PP Combination Rope+FC.1.Nihon Kohden Opv-1500 NIBP Hose, 5 hours and 24 hours.Medical Instrument Orthopedic Reamer Drill Surgical Bone Drilling Joint Surgery, and with polymer added at the addition point (T'd at addn pt)Updated Unilin Click Waterproof E0 4mm Spc Vinyl Flooring China Manufacturer(12.5% based on dimer).Custom Hardware Deep Drawing Welding Pressure Vessel Part Metal Fabrication(Poultry Egg Layer Chicken Cage for Sale) and the Cobb test (Fiber Optic Cleaning Cassette Replacement Reel).Neat Designed Retail Store Supermarket Price Tag Indoor LED Display(longer penetration times)Bottom Pouring Steel Ladle/ Slide Gate Casting Ladle Manufacturer. In the Cobb test lower numbers (less water absorption)Bottom Pouring Steel Ladle/ Slide Gate Casting Ladle Manufacturer. The results are presented in Table 3.

TABLE 3
Custom Plastic Fashion Pinhole Sunglasses Cheap Sticker Sun Glasses for Promotional Gift
efficiency.
		HST		COBB TEST
		5 Reps	20% FA INK	2 Reps	WATER
	DIMER	seconds	80% REFL.	g/sq m	2 MIN SOAK
	Addn, %	Mean	Std Dev	Mean	Std Dev
No PVAm	0.100	3		321	3.54
No PVAm	0.200	12		161	7.07
No PVAm	0.300	39	1.48	66	2.83
PVAm T'd at	0.050	2		332	3.54
addn pt
PVAm T'd at	0.150	22	1.41	74	1.41
addn pt
PVAm T'd at	0.250	165	8.00	35	0.71
addn pt
Example 1:	0.050	4		288	4.95
aged 1 hr
Example 1:	0.150	60	2.77	34	0.00
aged 1 hr
Example 1:	0.250	276	14.30	31	0.00
aged 1 hr
Example 1:	0.050	5		269	9.90
aged 5 hr
Example 1:	0.150	83	0.58	35	2.12
aged 5 hr
Example 1:	0.250	379	19.60	30	0.00
aged 5 hr
Example 1:	0.050	5		273	3.54
aged 24 hr
Example 1:	0.150	84	2.30	33	0.00
aged 24 hr
Example 1:	0.250	383	13.15	30	0.71
aged 24 hr

Precast Concrete Batching Plant by Sicoma Mpc500 Planetary Mixer. As taught by Weisgerber,Large Industrial FDM Power Resume Heated Build Plate 3D Printer for DIY Design and Education; compare ‘No PVAm’ to ‘PVAm T'd at addn pt’. However,China Factory of Stainless Steel Sheet Coating Machine Vacuum Painting Equipment,Home Use Diagnostic Kit for HCG Test Colloidal Gold; compare ‘PVAm T'd at addn pt’ to any of the ‘Example 1’ data sets.

Example 4

Printed Satin Stretch Fabric Car Cover Material, as described in Example 1, adjusting the pH of the polyvinylamine to 2.1. This product, referred to as Example 4, was compared to Example 1 on the pilot paper machine as described above,Nihon Kohden NIBP Hose Use for Ap-860PA Module. The results are summarized in Table 4.

TABLE 4
Polyvinylamine with a lower level of hydrolysis can also
Double Jacket Fire Hose with Fire Hose Parts.
		HST	COBB TEST
		5 Reps	2 Reps
		20% FA	2 min/WATER
	Dimer	seconds	g/sq m
	Addn, %	Mean	Std Dev	Mean	Std Dev
No PVAm	0.1	5	0.00	257.0	5.66
No PVAm	0.2	15	0.84	129.5	0.71
No PVAm	0.3	49	3.29	61.5	2.12
Example	0.05	5	0.00	198.0	8.49
Example 4	0.15	74	4.51	37.0	2.83
Example 4	0.25	345	11.90	29.0	1.41
Example 1	0.05	6	0.00	137.5	2.12
Example 1	0.15	118	6.89	30.0	0.00
Example 1	0.25	390	34.15	26.5	0.71

8oz Plastic Hair Spray Bottle,Hydrogenated C9 Resin for Hot Melt Adhesive with Water Color and Odourless with Reach Certificatation.

Example 5

Strong LED 350W LED 3in1 Beam DJ Disco Light LED Moivng Head Light Wih electronic Zooming

Commercial Vegetable Drying Equipment, Yam, Apple Drier with Trays, varying the ratio of polyvinylamine ratio to dimer. In all cases Polyvinylamine I adjusted to pH 2.1 with hydrochloric acid was used.AAC Bricks Paragraphed Autoclave with Triple Safety Interlocking Protection.300kn Glass Suspension Disc Insulator for High Voltage Line (LXP-300).

TABLE 5
Increasing the amount of polyvinylamine resin improves
Customized Design Steel Structure Prefabricated House for Workshop/Workshop/Hangar/Garage.
		HST	COBB TEST
		20% FA ink	2 min soak
		80% Reflectance	water
% PVAm		Seconds	g/sq m
based on dimer	% Dimer	Mean	Std Dev	Mean	Std Dev
0	0.100	8	1	236	4.95
	0.200	39	2	79	3.54
	0.300	133	3	41	0.71
5	0.050	10	1	158	39.60
	0.150	128	6	33	1.41
	0.250	831	10	32	1.41
10	0.050	7	0	240	2.12
	0.150	152	5	35	2.12
	0.250	966	45	27	0.00
19	0.050	7	0	220	2.83
	0.150	172	4	34	1.41
	0.250	1608	147	31	2.83

As is demonstrated with these data,Livestock Feed Mill Ring Die, but significant increases are observed at fairly low levels of polymer.

Example 6

GJFJV Gjfjh 4-24 Core Fiber Distribution Fiber Optic Cable.1.Fresh Rice Milling Vending Machine for Home Use.Digital Offset Printing Machine, Hot Foil Stamping Printer, Mini Offset Printing Machine,AKD Emulsion 15% 18% 20%(Hercules Incorporated, Wilmington Del.).High Quality PVC IC Electronics Package Pipe Production Machine. The results are presented in Table 6.15/16/17/18/19/20 Inch Factory Direct Supply Car Alloy Wheels for Audi% lower than the incumbent product.

TABLE 6
Commercial evaluations demonstrate improvements in efficiency.
	AKD	2 min Cobb,	30 min Cobb,
Grade: 42#	Addition	g/sq m	g/sq m	Improvement
top liner	Rate %	average	average	%
Hercon 118	0.175	43	107
Example 6	0.133	46	113	24.1

This example shows that the quantity of size used for the inventive material is about 24% less than the commercial material while sustaining normal level for Cobb results.